Asoni SVR611 Bedienungsanleitung PDF herunterladen (Seite 8)

 When “Audio Encode” function is enabled in Configuration

 Video/Audio  Receiver Setting : you can hear the

voice of the decoded IP camera or video server.



Audio In:

The RCA connector allows connect to a microphone or audio

source, the voice will be encoded and

transferred to the remote

site via network.

 RS-485 Connector:

This terminal block allows connect to a PTZ device.



Antenna Connector:

Available for Wireless model. To connect the included wireless

antenna.



SD Card Slot:

Insert a SD card if you want to do the event recording (Video

only) in the video transceiver.

 Digital I/O:

Digital In and Relay Out.

1. If you want to use the “Encoder” function, connect the video and audio outputs of

analog camera to “Video In” and “Audio In” connectors. If the analog camera is a PTZ

device, connect the RS-485 for the remote PTZ control.

2. If you want to use the “Decoder” function, connect the “Video Out” connector to an

analog monitor or DVR, and connect the “Audio Out” connector to an amplified

speaker or DVR.

3. Connect the cable of Digital I/O if you want to use this functionality.

4. Connect the wireless antenna for the Wireless model.

5. Connect Ethernet cable for network connection.

6. Connect power adapter to turn on the device.

7. If the device is PoE model, the power adapter is not necessary. The device will get the

power from the PoE injector or PoE switch.

PoE (Power over Ethernet) is a technology that integrates power into a standard LAN

infrastructure. It enables power to be provided to the network device, such as an IP

phone or a network camera, using the same cable as that used for network connection.

It eliminates the need for power outlets at the camera locations. Please follow the

below figure for the connection.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 65 66

Keine Kommentare

Asoni SVR611 Bedienungsanleitung Seite 8